Develops from a spongy rhizome and is a perennial herbaceous plant. Lotus leaves are circular, peltate, and 1-3 feet wide. A milky substance is found in all parts of the plant. Young plants or plants developing early in the year have leaves that are flat and float on the water surface. As the leaves develop, the blades raise several feet above the water surface. The flowers are supported several feet above the water surface on a long stalk. The fruits are hard nut like seeds embedded into an obconic receptacle.
Treatment options for american lotus
|Control Method||Dosage||Comments||Cost||Unit Cost|
|2,4-D||100-200 lbs/acre||Note water use restrictions||$122/50 lb bag||$244-$488/acre|
|Glyphosate (Rodeo)||3 oz/gal spray/acre||Add Surfactant Do not apply w/in 1/2 mile Potable Water Intake||$59.95 gallon||$2.81 – $59.95/acre|
Description of Treatment Options
- Chemically treating a pond with herbicides approved for aquatic use can be effective for many types of vegetation. Chemical treatments can be very effective in controlling vegetation especially in small areas of a pond such as swimming areas or boat ramps. Herbicides generally provide quick results, but plants often return and several applications may be necessary to maintain control. When using herbicides/pesticides, protect yourself and others by strictly following all label directions. Certain herbicides can be purchased and used only by Certified Pesticide Applicators, so herbicide treatment may not be possible without paying someone to do it for you. Additionally, community or shared waters (several landowners) requires herbicide application to be done by individuals with a Certified Pesticide Applicators License. Individuals that treat their own ponds should keep the rule of thirds in mind when applying herbicides. Treat 1/3 of the pond, then wait at least ten days prior to treating the next 1/3 and then treat the last 1/3 after another ten days elapses. By treating 1/3 of the pond at a time, fish kills attributed to low dissolved oxygen as a result of decaying plant matter can be prevented. Treatments should not be conducted during very hot or dry weather conditions since these conditions often produce low oxygen levels and plant treatments will only further deplete oxygen levels.